Bed Length | 7 Feet |
Height of Centre | 304 mm |
Swing Over Bed | 555 mm |
Spindle Bore | 54 mm |
Machine Type | All Geared Heavy Duty Lathe Machine |
Applicable Industry | Tool Room, Power Plant, Paper Mills, Steel Rolling Mills, Sugar Mills, Textile |
Bed Width | 325 mm |
Number of Spindle Speeds | 8 |
Swing Over Cross Slide | 390 mm |
Maximum Swing in Gap | 810 mm |
Lead Screw Diameter | 38 mm |
Lead Screw Pitch | 4 T.P.I |
Tail Stock Spindle Diameter | 55 mm |
Tail Stock Spindle Taper Bore | MT-4 |
Tail Stock Spindle Travel | 180 mm |
Heavy Duty Lathe Machines are one of the most extensively utilised lathe machines because of its high quality and rapid rate of output. These are made of high-quality iron and steel and are built to withstand the most difficult shaping chores. They are particularly well suited to high-volume production because to their high-performance capacity to work at fast speeds.
Features:
Standard Accessories:
Steady Rest, Follow, Rest, Face Plate, Chuck Plate, Spindle Sleeve, 2 Nos. Dead Center, Change Gear Set, Tool Post Spanner, Switch Stand.
Optional Accessories:
Norton Gear Box, Flame Hardened Bedways, Rear Tool Post, Tapper Turning Attachment, Electrical Coolant Pump with Fittings, Electric Motor, True Chuck, Dog Chuck, Reversible Switch, V-Belt, Machine Lamp, Extra Center Height, Extra Spindle Hollow.
Bed Length | 9 Feet |
Height of Centre | 457 mm |
Swing Over Bed | 865 mm |
Spindle Bore | 80 mm |
Machine Type | All Geared Extra Heavy Duty Lathe Machine |
Applicable Industry | Oil Industry, Power Plant, Shipbuilding, Gas Industry |
Number of Spindle Speeds | 8 |
Swing Over Cross Slide | 600 mm |
Maximum Swing in Gap | 1320 mm |
Lead Screw Diameter | 50 mm |
Lead Screw Pitch | 2 T.P.I |
Tail Stock Spindle Taper Bore | MT-5 |
Features:
Bed Length | 7 Feet |
Height of Centre | 267 mm |
Swing Over Bed | 525 mm |
Spindle Bore | 54 mm |
Machine Type | Belt Driven Heavy Duty Lathe Machine |
Applicable Industry | Sugar Mills, Steel Rolling Mills, Textile, Paper Mills, Tool Room |
Bed Width | 323 mm |
Number of Spindle Speeds | 8 |
Swing Over Cross Slide | 300 mm |
Maximum Swing in Gap | 830 mm |
Lead Screw Diameter | 38 mm |
Lead Screw Pitch | 4 T.P.I |
Tail Stock Spindle Diameter | 63 mm |
Tail Stock Spindle Taper Bore | MT-4 |
Tail Stock Spindle Travel | 180 mm |
Motor Power | 3 HP |
Heavy Duty Lathe Machines are one of the most extensively utilised lathe machines because of its high quality and rapid rate of output. These are made of high-quality iron and steel and are built to withstand the most difficult shaping chores. They are particularly well suited to high-volume production because to their high-performance capacity to work at fast speeds.
Features:
Standard Accessories:
Steady Rest, Follow, Rest, Face Plate, Chuck Plate, Spindle Sleeve, 2 Nos. Dead Center, Change Gear Set, Tool Post Spanner, Switch Stand.
Optional Accessories:
Norton Gear Box, Flame Hardened Bedways, Rear Tool Post, Tapper Turning Attachment, Electrical Coolant Pump with Fittings, Electric Motor, True Chuck, Dog Chuck, Reversible Switch, V-Belt, Machine Lamp, Extra Center Height, Extra Spindle Hollow.
*Your information is safe with us.
Bed Length | 8 Feet |
Height of Centre | 406 mm |
Swing Over Bed | 785 mm |
Spindle Bore | 80 mm |
Machine Type | Belt Driven Extra Heavy Duty Lathe Machine |
Applicable Industry | Power Plant, Steel Rolling Mills, Shipbuilding, Paper Mills, Textile |
Bed Width | 455 mm |
Number of Spindle Speeds | 8 |
Swing Over Cross Slide | 500 mm |
Maximum Swing in Gap | 1150 mm |
Spindle Speed Range | 20-200 RPM |
Lead Screw Diameter | 50 mm |
Lead Screw Pitch | 2 T.P.I |
Tail Stock Spindle Diameter | 76 mm |
Tail Stock Spindle Taper Bore | MT-5 |
Tail Stock Spindle Travel | 260 mm |
Motor Power | 3 HP |
Features of Extra Heavy Duty Lathe Machine:
Bed Length | 5.5 Feet |
Height of Centre | 267 mm |
Spindle Bore | 52 mm |
Machine Type | Belt Driven Heavy Duty Lathe Machine |
Applicable Industry | Paper Mills, Sugar Mills, Tool Room, Textile |
Bed Width | 325 mm |
Number of Spindle Speeds | 8 |
Distance Between Centre | 525 mm |
Lead Screw Diameter | 38 mm |
Lead Screw Pitch | 4 T.P.I |
Tail Stock Spindle Diameter | 60.3 mm |
Tail Stock Spindle Taper Bore | MT-4 |
Tail Stock Spindle Travel | 180 mm |
Motor Power | 3 HP |
Country of Origin | Made in India |
Features: